Anaesthetic efficacy of eugenol on Flowerhorn (Amphilophus labiatus × Amphilophus trimaculatus)

Anaesthetic efficacy of eugenol was investigated on Flowerhorn (Amphilophus labiatus × Amphilophus trimaculatus). A total of 104 fish with average weights of 12 ± 2.5, 28 ± 5 and 53 ±5.1 g were subjected to 25–200 mg L^?1 eugenol and behavioural responses as well as induction and recovery times were recorded. Induction and recovery times were significantly affected by eugenol concentration as well as fish weight (P < 0.05). Generally, 49.9–127.3 s after exposure to 50–200 mg L^?1 eugenol, fish reached stage 3 anaesthesia (suitable for general handling). Fish entered stage 4 anaesthesia (suitable for surgery and blood sampling) over 57.3–140.4 s post exposure to such concentrations. Recovery time was 91.7–312 s in all weight classes for all eugenol concentrations. Mortality (23%) was only observed in 12‐g fish when were subjected to 200 mg L^?1 eugenol. This study showed the behavioural response of Flowerhorn to anaesthesia and eugenol efficacy as an anaesthetic in this important ornamental species. The general quadratic equation revealed that concentrations of eugenol and fish size along with their interactive effects have significantly contributed to the model, with concentration recording the highest beta value in all models (β = ?0.809, ?0.818 and ?0.909, P = 0.000). According to the results, minimum eugenol concentration to induce anaesthesia in less than 3 min was 50 mg L^?1.     

Effect of hybrid post treatments on the structural property and water flux of polysulfone hollow fiber membrane

The application of post treatments in preparation of high flux membranes is expanding rapidly. In this work, several hybrid post treatments have been introduced and used for change in the water flux of polysulfone (PSf) hollow fiber membranes. Dry wet spinning method was employed for fabrication of PSf hollow fiber membrane from spinning dope in mass ratio of 15:5:80 of PSf/PVP-K90/NMP. The simultaneous effects of single and hybrid post treatments containing traditional hypochlorite; high pressure injection technique (HPI) of hypochlorite, hot air and hot water treatments on the morphology and water flux of fabricated hollow fibers has been investigated. AFM analysis and image processing of SEM microphotographs of hollow fibers were used for structural studies. The mechanical properties of hollow fibers as well as strain at break and strength also were studied. It was found that the pores size and surface roughness parameter of hollow fiber membranes have been increased after traditional hypochlorite, HPI technique and hot water treatments while decreased when heat treated in air. In general all the employed hybrid post treatments caused to increase in the pores size of hollow fibers although the pores size increase rate in the membranes treated by the hybrid post treatments involving hot air was much lower than the others. The mechanical properties of hollow fibers have been decreased after hybrid and single post treatments containing traditional hypochlorite, HPI technique and hot water treatment while slightly increased after post treatments containing hot air. It was stated that the fabricated PSf hollow fibers were considerably affected by the employed hybrid post treatments. This can be attributed to the combine effects of used post treatments.     

Retracted: Study of testis histology and sperm morphology in the Bunnei,Barbus sharpeyi (Gunther, 1874) induced by luteinizing hormone‐releasing hormone analogue and carp pituitary extract

This study was conducted to determine the effects of hormone treatment on testis structure in Barbus sharpeyi, as well as the morphology of sperm examined by scanning electronic microscopy (SEM). Male B. sharpeyi were divided into three groups (three fish per group) and injected with luteinizing hormone – releasing hormone analogue (LHRH–A₂) or carp pituitary extract (CPE). The first and second groups were treated with 10 μg kg^?1 LHRH–A₂ and metoclopramide (MET), and their testis were sampled pre‐ and Poststripping respectively. The third group received 2 mg kg^?1 CPE and were killed pre‐stripping. Based on the histological results obtained, the testicular connective tissue of the lumen was thicker, and seminal vesicles were of a lower volume, in fish injected with CPE in comparison to the other groups. After treatment with LHRH–A₂ and MET, not all spermatozoa within the testis were ejaculated, and only a small amount of sperm was obtained by abdominal stripping. The highest and lowest diameters of connective tissue within lobules were observed in fish receiving CPE and LHRH–A₂ treatments respectively. There was a significant difference (P < 0.05) in lobule space between the fish injected with the CPE and the fish injected with the LHRH–A₂ and MET. The SEM results revealed that the spermatozoa of B. sharpeyi were composed of a spherical to elliptical head, a cylindrical midpiece, and a lengthy flagellum. In conclusion, it was found that injection with LHRH–A₂ and MET improved the spermatogenic process in comparison to injection with CPE.     

Effects of date palm leaf fiber on the thermal and tensile properties of recycled ternary polyolefin blend composites

This work investigated the effects of date palm leaf fiber (DPLF) content on the thermal and tensile properties; and morphology of compatibilized polyolefin ternary blend. Recycled polyolefin ternary blend consisting of low density polyethylene (RLDPE), high density polyethylene (RHDPE) and polypropylene (RPP) were fabricated at different parts per hundred resin (phr) of DPLF. Maleic anhydride grafted polyethylene (MAPE) was used as compatibilizer to enhance the adhesion between filler and polymer matrix. The composites were prepared using melt extrusion and tests samples were produced via injection molding process. Thermal conductivity results showed that as much as 11 % reduction in thermal conductivity was achieved with the incorporation of 30 phr DPLF. Highest tensile strength was observed with the incorporation of 10 phr DPLF. The elongation at break was reduced with the addition of DPLF due to impediment of chain mobility by the fillers. Initial degradation temperature increased with the addition of DPLF. Hence, it is concluded that DPLF can be used to develop green and thermally insulating composites. It is hoped that the present results will stimulate further studies on the thermally insulative materials based on natural fibers reinforced polymer composites for applications in the building industries.     

The true nature of Ganoderma in Iran: Taxonomy based on ITS and mtSSU rDNA

The genus Ganoderma Karst. has broad‐spectrum usage in biotechnology, medicine and the food industry. The complexity of the morphology within species has led to uncertain identification in the past, but recent advancements in molecular identification methods have provided scientists with the opportunity to better understand the taxonomy of the species. The present study attempts for the first time to elucidate the distinctiveness of the Ganoderma species growing in Iran concerning those elsewhere in the world based on mitochondrial small subunit ribosomal DNA (mtSSU rDNA) and internal transcribed spacer (ITS) sequence data. The results disclosed that the G. lucidum Karst. samples collected in Iran are more similar to the European Ganoderma species than to the Asian (Chinese) one used in this study.     

Nonparametric phenotypic stability analysis in advanced barley (<Emphasis Type="Italic">Hordeum vulgare</Emphasis> L.) genotypes

The development of genotypes with adaptation to a wide range of environments is one of the most important goals of plant breeding programs. In order to compare nonparametric stability measures and to identify promising high-yield and stable barley (Hordeum vulgare L.), 20 barley genotypes selected from the Iran/ICARDA joint project and grown in nine environments during 2009-11 in Iran. Four nonparametric statistical tests of significance for genotype × environment (GE) interaction and 10 nonparametric measures of stability were used to identify stable genotypes in nine environments. Results of nonparametric tests of G×E interaction (Kubinger, Hildebrand, and Kroon/ Laan) and a combined ANOVA across environments, indicated the presence of both crossover and non-crossover interactions. Also, only TOP and rank-sum values were positively associated with high yield. Thus, in the simultaneous selection for high yield and stability, only the rank-sum and TOP methods were useful in terms of the principal component analysis results, and correlation analysis of nonparametric stability statistics and yield. According to these stability parameters (TOP and rank-sum), three genotypes (G13, G12, and G17) were the most stable for grain yield. The results also revealed that based on nonparametric test results, stability could be classified into three groups, according to agronomic and biological concepts of stability.     

Antibacterial activities of a new combination of essential oils against marine bacteria

The antibacterial activities of essential oils and herbal extracts have been demonstrated against a range of bacterial species. In this study, the antibacterial effects of a new combination of essential oils from the herbs Thymus vulgaris, Salvia officinalis, Eucalyptus globulus and Mentha piperita were assayed against common bacterial isolates (Staphylococcus aureus, Escherichia coli and Pseudomonas aeroginosa) and fifteen novel marine bacteria isolates. The sensitivity of different isolates to antibacterial activity of the essential oils was determined using well diffusion assays. Minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) were quantified by micro dilution assays. The data demonstrate that the combination of essential oils had potent antibacterial effects and marine bacteria were more sensitive to growth inhibition (P < 0.05). MIC rates were 0.77–6.18 mg/ml, and MBC rates were 1.67–12.30 mg/ml. This indicates that the combined essential oils (CEO) can be a new source of antibacterial agents for use in marine aquaculture.     

Microsatellite and mitochondrial DNA analyses reveal no genetic difference between two pufferfish species torafugu <Emphasis Type="Italic">Takifugu rubripes</Emphasis> and karasu <Emphasis Type="Italic">T. chinensis</Emphasis>

It has been reported that the nucleotide sequences of the mitochondrial and nuclear genes of Takifugu pufferfish torafugu T. rubripes and karasu T. chinensis show 99–100% sequence identity, indicating a very close relationship between the two species. To further investigate this genetic relationship, we compared genetic variation at four microsatellite loci and at the mitochondrial control region (CR) (561 bp) between groups of T. rubripes caught at two locations [TrG, caught in the Genkai Sea off Tsushima Island in 2003 (n = 50); TrS, caught in the Suwo Sea off Kita-Kyushu in 2008 (n = 50)] and T. chinensis caught at one location (TcK, caught off the east coast of Korea in 2004; n = 50). Analyses using microsatellite loci showed that genetic diversity index values of the TrG, TrS and TcK groups were 0.9505, 0.9350 and 0.9335, respectively, while values of genetic distance and genetic differentiation between TrG and TcK (0.0543 and 0.0189, respectively) were smaller than those between TrG and TrS (0.0857 and 0.0194, respectively). Analyses using CR for the same specimens showed that genetic distances were consistent with those obtained using microsatellite loci. These results, together with our previous observations, suggest that T. rubripes and T. chinensis are very closely related and possibly can be regarded as the same species.     

Potential host range of four Phytophthora interspecific hybrids from Clade 8a

In recent years several interspecific hybrids have been reported in the plant pathogenic oomycete genus Phytophthora. Due to the large genotypic and phenotypic changes, these hybrids might have broader or more limited host ranges compared with their parental species. It is crucial to understand the host range of Phytophthora hybrids to minimize the economic losses caused by their infection. The potential host range of four hybrids belonging to Clade 8a of the Phytophthora phylogenetic tree was investigated in this study. Thirty species of herbaceous plants as well as eight species of woody plants were inoculated and monitored for any symptom of infection. In addition, the detached twigs of 32 tree species, fruits of six plant species, tubers of potato, and roots of carrot and sugar beet were investigated for susceptibility to these hybrids. Almost all hybrids caused severe rot on all tested fruits, tubers, and roots, although different isolates showed different pathogenicity on detached tree twigs. All hybrids tested had a different host range compared with their parental species: they were able to infect plants outside the host range of their parents, infect hosts of both parental species, although these parents did not have overlapping hosts, or, in some cases, they were not able to infect hosts infected by the parents.